Fancy Phrases

Published on October 27, 2020October 26, 2020 by Michele Jutrisa Category: Uncategorized

Hi and welcome today to my Blog.

Fancy Phrases – Happy Birthday

My card today uses the Fancy Phrases Stamp Set by Stampin’ Up! ®.

I have looked at this stamp set for so long and have just kept saying to myself …”should I get it, do I need it”. Who else does this or is it just me?

I was inspired by Michelle Last and her card – Faux Fabric Cardmaking Technique

This card is a very simple card to make with just a few simple steps.

How to make this card.

Card Base – Seaside Spray 21 x 14.9cm, score at 10.5cm
Mat – Blushing Bride 10 x 14.4cm
Card front – Whisper White 9.7 x 14.1cm
Sentiment – 2cm x 10cm
10cm Seaside Spray Scalloped Linen Ribbon or 2 x 10cm lengths
On Whisper White Cardstock stamp the floral image all over using Memento Tuxedo Black.
Using Sponge Daubers and 3 Ink Pads – Blushing Bride, Seaside Spray and Pear Pizzazz colour the flowers…don’t worry about going out side the lines.
To give the card front a fabric look run it through the Stampin’ Up! ® Cut and Emboss Machine using the Subtle 3D embossing folder.
Attach card front onto the Blushing Bride mat.
Adhere the mat/cardfront to the Seaside Spray Card Base.
Stamp the sentiment onto the Whisper White strip using Memento Tuxedo Black Ink.
On the back of the sentiment strip adhere Tear & Tape down each side.
Cut the length of ribbon in half going down though the center of the linen strip or use 2 lengths x 10cm. Peel backing off the Tear & Tape and attach the ribbon with only the scalloped edge showing on the right side.
Attach Dimensionals to the back of the strip and attach to card front.
Colour 3 Pearl Basic Jewels with Dark Flirty Flamingo Blend and adhere to the card.
Card Insert – Blushing Bride 10 x 14.4cm, Whisper White 9.7 x 14.1cm. Adhere the Whisper White to the Blushing Bride and attach to the inside of the card.

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

Below I have listed all the products needed to make this card. By clicking on the items below you can add them to your Shopping Basket on my Online store.

Product List

If you enjoyed this post, please be sure to . . .

Quite Curvy Bundle – Global Design Project #263 Theme Challenge

Published on October 25, 2020October 25, 2020 by Michele Jutrisa Category: Blends, Uncategorized

Hi and welcome today to my Blog. Thank you for joining me today as I share with you one of my latest creations using the Quite Curvy Bundle.

Quite Curvy Bundle

You’re One in a Million…There are some people in your life that you are so grateful that they are there and they are that ‘One- the One in a million’

I have made this card using the Quite Curvy Bundle along with Plaid Tidings for the Global Design Project #GDP263. To see all the other projects created by the Design Team and other entries in this challenge Click on the link above.

Products used in this card are…

- Quite Curvy Bundle – Can be ordered in November
- Plaid Tidings Designer Series Paper
- Brushed Metallic Cardstock
- Fluid 100 Watercolour Paper
- Pumpkin Pie Stampin’ Pad
- Cajun Craze Stampin’ Pad
- Shaded Spruce Stampin’ Pad
- Basic Black Cardstock
- Whisper White Cardstock
- VersaMark Ink Pad
- White Embossing Powder
- Rhinestone Basic Jewels
- Blends – Pumpkin Pie, Cajun Craze and Shaded Spruce

How I Made this Card….

- Card Base – Basic Black 14.9 x 21cm, score at 10.5cm
- Mat – Brushed Metallic Cardstock 14.3 x 10 cm
- Basic Black – 9.7 x 14cm
- Plaid Tidings -14 x 8.3 cm, Using the Curvy Die cut the Plaid Tidings approx 3cm from the bottom edge.
- Adhere the bottom section to the Basic Black Cardstock with Multi-Purpose Glue.
- Using the VersaMark stamp your sentiment following the curve and emboss with White Embossing Powder.
- Using Multi-Purpose Glue adhere the top section of the Plaid Tidings to the basic Black above the sentiment.
- Adhere the Plaid Tidings & Basic Black to the Card Mat – Brushed Metallic
- Attach these 3 layers to the card base again with Multi-purpose glue or with Seal.
- On the Fluid 100 watercolour paper stamp the leaf image and heat emboss with White Embossing Powder.
- Water colour the leaves using Pumpkin Pie, Cajun Craze and Shaded Spruce with a water painter.
- When the leaves are dry cut the leaves with the die cut from the Curvy Dies, using Black Dimensional attach to card Front.
- Colour the Rhinestone Basic Jewels with Blends Pumpkin Pie, Cajun Craze and Shaded Spruce

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

Below I have listed all the products used and they are linked back to my On-Line Store for your easy shopping experience.

Product List

If you enjoyed this post, please be sure to . . .

May you days be merry & bright…..Curvy Christmas

Published on October 23, 2020October 21, 2020 by Michele Jutrisa Category: Christmas

Good Morning and welcome again to me Blog

May you days be merry & bright

Today is a very simple card great for the beginner stamper…This card uses the Curvy Christmas Stamp set from the Curvy Celebrations.

My card uses just one stamp set, 2 colours in Cardstock, 4 Stampin’ Ink Pads and a little bit of Bling – Wink of Stella .

Products used in this card are…

Curvy Christmas Stamp set
Whisper White Cardstock
Sahara Sand Cardstock
Misty Moonlight Stampin’ Pad
Shaded Spruce Stampin’ Pad
Stazon Black
White Craft Ink
Wink of Stella

How to make this card.

Card Base Whisper White 14.9 x 21 cm, score at 10.5cm
Card Front Sahara Sand 10 x 14.4cm
Using the Shaded Spruce Ink and the curvy trees..stamp 3 rows of trees off setting each one so they look like rolling hills.
Stamp the curvy Stars in the Misty moonlight. Here I stamped one in one direction and the turned the stamp 360° and stamped the second row of stars again offsetting the stamps a little.

**Each row of stamping is not the same so then it gives the card movement

Using Stazon Black Stamp the sentiment between the Trees and Stars.
Press some of the White Craft ink into the ink pad lid or onto an acrylic Block. Water down slightly and with a Water Painter colour in the branches on the trees.
Add extra water to the White Craft ink and add a few splatters
You can also add some splatters with the Wink of Stella.

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

If you enjoyed this post, please be sure to . . .

Jar of Flowers #TGIFC286 Inspiration Challenge

Published on October 22, 2020October 24, 2020 by Michele Jutrisa Category: Uncategorized

Thank you for joining me on my blog today!

Jar Of Flowers

My card was Inspired by the TGIF Inspiration Challenge…

For this card I used the Jar of Flowers Bundle and Paper from the In Good Taste Designer Series Paper.

This card has a real country farm feel with the timber boards and sunflowers. Making this card reminds me of ‘Home’ and time spent with my Grandmother in country NSW.

Colouring in is so relaxing and today it was good just to spend sometime just chilling & doing what I love…LOL!

Products used in this card are…

Jar of Flowers Bundle
Fancy Phrases – Sentiment
In Good Taste Designer Series Paper
Tasteful Textile 3D
Pool Party Cardstock
Whisper White Cardstock
Blends – Daffodil Delight Combo, Mango Melody Dark, Granny Apple Green Combo, Old Olive Combo, Cajun Craze Combo, Rococo Rose Combo, Purple Posy Combo, Pool Party
Memento Tuxedo Black
Linen Thread

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

Below I have listed all the products used and they are linked back to my On-Line Store for your easy shopping experience.

Product List

If you enjoyed this post, please be sure to . . .

Hello…

Published on October 21, 2020August 21, 2020 by Michele Jutrisa Category: Tutorial Included

Hi and welcome today to my Blog.

Hello…

My card today uses products from the Stampin’ Up! ® 2020 August- January Mini Catalogue. Here I have used the Love of Leaves Bundle, Plaid Tidings 6 x 6″ Designer Series Paper and Brushed Metallic Cardstock.

Did you notice the leaf in Cajun Craze has it’s tips dipped on gold…Check out my ‘How did you do that’ videos on YouTube to learn about this technique.

How to make this card.

Click on the Link below for a step by step instructions for making this card. Including all measurements for both A4 – Metric and Letter Size – Imperial

Hello – Love of Leaves

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

Below I have listed all the products used and they are linked back to my On-Line Store for your easy shopping experience.

Product List

If you enjoyed this post, please be sure to . . .

Curvy Christmas by Stampin’ Up!….. Part 2

Published on October 20, 2020October 19, 2020 by Michele Jutrisa Category: Christmas

Hi and welcome today to my Blog.

Curvy Christmas…Part 2

Yesterday on my Blog I showed a card using the Sketch Challenge from Global Design Project #GDP262.Where I created my own decorative paper using Blends and alcohol on Vellum. The card was a simple card to make and I want to show that by changing the printed paper to a DSP it can be made simpler still for you to CASE.

I have used the Classic Christmas 6 x 6″ in Sahara Sand. You can purchase this DSP in November as part of the Curvy Celebrations.

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

If you enjoyed this post, please be sure to . . .

Curvy Christmas – Global Design Project #GDP262.

Published on October 18, 2020 by Michele Jutrisa Category: Blends

Hi and welcome today to my Blog.

Curvy Christmas

My card today I used the Curvy Christmas Photopolymer Stamp set along with the Curvy Dies.

I have used Stampin’ Up! Blends to create my background. The colours I used were Poppy Parade and Cherry Cobbler.

The colour was added to velum and by adding Isopropyl Alcohol the colour disperses leaving this fantastic result.

The inspiration for this card comes from this weeks challenge with Global Design project #262. The team at GDP have some wonderful examples of different ways to use this Sketch. Click on the link and have a look, they are amazing.

The Curvy Christmas Stamps is part of the Curvy Celebrations that starts on the 3rd November – 4 January.

Curvy Celebrations

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

If you enjoyed this post, please be sure to . . .

Made with Love – Curvy Celebrations

Published on October 17, 2020October 17, 2020 by Michele Jutrisa Category: Blends, Special Promotions

Hi and welcome today to my Blog.

Made with Love

My card today uses the Quite Curvy Bundle, this was such a fun card to create. For this card I have used the Blends in two different ways…to colour the leaves and birds and to create the background.

The leaves and birds were coloured using Blends picking up some of the colour from the background.

For the leaves I used

Granny Apple Green
Bermuda Bay
Shaded Spruce
Misty Moonlight

For the Birds

Balmy Blue
Seaside Spray
Smoky Slate
Misty Moonlight
So Safron
Flirty Flamingo

The Background..

The back ground was created also using Blends and Isopropyl Alcohol on Window Sheets.

Colours I used were…

Granny Apple Green Dark
Misty Moonlight Dark

I have wanted to do this technique for a bout 6 months and have been unable to find any information on it. This week Zsuzsanna Balazs posted a video on YouTube showing the technique. The video is not in English but by watching carefully you can see what she has done to create this amazing background. Here is the link to her video… HERE

Tips I learnt from the video are…

Use 99.9% Alcohol – Diggers is 99.9%, used for cleaning hard surfaces..Glasses, computer screens etc. DO NOT USE Isocol Rubbing Alcohol, it’s only 64%. The 99.9% seams to allow the Alcohol ink to become more fluid.
Use the DARK Blends to get the best effects
Keep repeating the Ink to Window sheet until you get the look you want and allow it to dry a little between each attempt. Just be aware that what you already have on the window sheet will go fluid again when the alcohol touches it.
Have a clean white piece of paper close so you can place your window sheet on to see the colour.
Use the largest Acrylic Stamp Block
You will need paper towel to clean your block…remove ink from your block by spraying with the alcohol and wipe off.
Adhere window sheet to your card with Glue Dots, which can be hidden under embellishments. My card above I have a glue dot under the Rhinestone and it is glued under Whisper White overlay.

The Quite Curvy Bundle is part of the Curvy Celebrations that starts on the 3rd November – 4 January.

Curvy Celebrations

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

If you enjoyed this post, please be sure to . . .

All is Merry & Bright… using the Peace & Joy Bundle

Published on October 16, 2020October 16, 2020 by Michele Jutrisa Category: Christmas, Uncategorized

Hi and welcome today to my Blog.

All is Merry and Bright

This brings to mind twinkling lights and lots of tinsel and everyone happy and having a wonderful time…oh’ I LOVE Christmas!

My card today is not covered in tinsel and twinkling light but it does have the tradition colours of Christmas and the bright sparkly of gold.

For my card today I have used the Peace and Joe Bundle along with the Heartwarming Hugs Designer Series Paper, which is on SALE until the end of October. You can find the link below.

How to Make this card…

Real Red Card Base – Cut 14.9 x 21cm, scored at 10.5cm
Mossy Meadow Mat – 10 x 14.4cm
Mossy Meadow Spot Designer Series Paper (DSP)- 7.5 x 9.7cm
Strip Designer Series Paper – 7.5 x 9.7cm
Vellum – 9 x 12.5cm, die cut with Scalloped die Die No: 6 (see pic below)
Whisper White cardstock -7 x 10 cm die cut with Scalloped die Die No: 4 (see pic below)
Emboss the die cut Whisper White with the Dainty Diamonds 3D Embossing Folder 152702
Brushed Metallic Cardstock – 4 x 11cm – adhere Adhesive sheet on the back before die cutting the word ‘Bright’. When peeling apart the die and Cardstock make sure you don’t loose the dot of the ‘i’…If you do then use a Rhinestone Jewel as the dot.
Whisper White Card Insert – 10 14.4cm.

How!

Using Multi-purpose glue adhere the Mossy Meadow spot DSP to the Moss Meadow mat allowing 1.5 mm around top and sides.
Adhere the DSP Strip to the bottom of the mat lining it up with the spot DSP along the sides and with 1.5mm around sides and bottom. The strips will overlap the spots.
Adhere the mat to the card front with either Seal or Multi-purpose glue
Peel the backing of the adhesive on the word ‘Bright’ carefully and attach to Whisper White Panel. Make sure that the part of the cross on the ‘T’ is attached to the panel, as in my photo above.
Turn the panel over to the back, the words that over hang are sticky from the adhesive. Pat them down with your embossing Buddy or a small amount of corn flower. This just removes the sticky.
Place dimensionals on the back of the Whisper White die cut & embossed panel and adhere onto the Vellum.
Add some Multi-purpose glue to the back of the vellum where the Whisper white covers it and glue to the card front.
On a scrao of Whisper White cardstock stamp the words ‘Merry’ & ‘And’ using Real Red Ink. Cut out by hand and adhere to card front using the Mini Dimensionals
Add some Gold Glitter Enamel Dots to your card
Attach the Whisper White Insert to the inside of the card

During the Month of October Stampin’ Up! ® are having the yearly Paper Sale…and the Heartwarming Hugs is one of the 15 paper designs in the sale. So if you LOVE our amazing DSP…NOW is the time to purchase it with a 15% discount.

To see all the Designer Series Paper in the Sale and to purchase Click HERE

Thank you for stopping by and reading my Blog. I hope you have enjoyed my projects & that you’re inspired to get crafty!

Do you need any of the products used on today’s project?

Click on the shopping links below and add them to your collection now.

Product List

If you enjoyed this post, please be sure to . . .

” width=”20″ height=”20″>

Wildly Grateful – Demonstrator Support Program Blog Hop October 2020

Published on October 13, 2020October 12, 2020 by Michele Jutrisa Category: Stamparatus

Thank you for joining us for our Stampin’ Up!® Demonstrator Monthly Blog Hop! As you follow the hop.

I hope you find lots of ideas and inspiration. We are a group of Stampin’ Up!® Demonstrators from around the world taking part in a training program helping us to build a successful Stampin’ Up!® Business and reach some of our goals. Thank you, we really appreciate your support.

Today I decided to make some customer cards for my October Customer’s & Team.

For this project I used products from Swirly Frames stamp set, Lovely You and the Small Bloom Punch.

This card is very simple using a ‘Stamping of technique or 2nd Generation’ stamping.

How to make this Card….

Cut a Piece of Whisper White Cardstock at 8.5 x 8.5cm
Using the Stamparatus stamped the circle Swirly Frame using Smoky Slate Stampin’ Pad.
To form the wreath- Using Just Jade Stampin’ Pad ,start on the right hand side & stamped the first leaf. Then stamped again without re-inking following the curve of the circle towards the top.(I stamped 3 times) Each time you stamp the image gets lighter and lighter – this gives you the 2nd & 3rd Generation.
Then repeat, this time following the bottom curve.

Stamp the sentiment with in the circle using the Memento Tuxedo Black Ink
Mat – Cut a piece of Magenta Madness cut at 9 x 9cm and adhere to the Whisper White square.
Card Base – Whisper White cut at 14.9 x 21cm, scored at 10.5cm
Adhere the stamped/ matted pieces to the card front.
Using the Small Bloom Punch 3 flowers where punched out for each card

and here comes the fun part….

With a piercing mat rub each flower in a circle motion with the large curve end of my Bone Folder to soften the paper.
Then take each flower and scrunch it into a ball. Gently unfold the flower, this gives your flowers some texture and dimension.
Adhere three flowers to the wreath with Multi-Purpose Liquid Glue or a Glue Dot.
In the center of each flower add a Bumble Bee Enamel Dot from the 2020-21 In Colour Enamel Dots.

Thank you for coming by today!

We have an amazing line up of Stampin’ Up!® demonstrators and we know you are going to love all the amazing projects that you are going to see today.

So you don’t miss out on anyone’s page you are currently on my page – Michele Jutrisa. The next page to visit is listed below my name on the list below. (If I am the last on the list then, jump up the top and continue from there). So make sure you ‘hop’ around to all the amazing projects on this hop, I hope you enjoy!

Do you need any of the products used on today’s project?

Click on the shopping links below and add them to your collection now.